The Complete Guide To Dewalt Dw320: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

DeWalt DW320 Information

the information about the DeWalt DW320 radial arm saw:

Introduction

The DeWalt DW320 is a powerful and versatile radial arm saw that is perfect for a variety of woodworking tasks. It features a 15-amp motor that delivers up to 3,800 RPM, making it capable of cutting through even the toughest materials. The saw also has a large work surface and a variety of features that make it easy to use, even for beginners.

Specifications

  • Motor: 15-amp
  • RPM: 3,800
  • Cutting capacity:
    • Horizontal: 24 inches
    • Vertical: 12 inches
    • Bevel: 45 degrees left or right
  • Work surface: 22 x 20 inches
  • Weight: 80 pounds

Features

  • Large work surface provides plenty of space for cutting large materials
  • Powerful 15-amp motor delivers smooth, accurate cuts
  • Variable speed control allows you to adjust the saw's speed for different materials
  • Bevel capacity of 45 degrees left or right
  • Laser guide helps you make accurate cuts
  • Dust collection port helps keep your work area clean

What's in the box

  • Radial arm saw
  • Laser guide
  • Blade wrench
  • Instruction manual

Conclusion

The DeWalt DW320 is a great choice for anyone looking for a powerful and versatile radial arm saw. It is easy to use and has a variety of features that make it perfect for a variety of woodworking tasks.

Here is a table of the full specifications of the DeWalt DW320:

FeatureSpecification
Motor15-amp
RPM3,800
Cutting capacity
* Horizontal: 24 inches
* Vertical: 12 inches
* Bevel: 45 degrees left or right |

| Work surface | 22 x 20 inches | | Weight | 80 pounds |

I hope this information is helpful. Please let me know if you have any other questions.

DeWalt DW320 Compare with Similar Item

a table comparing the DeWalt DW320 to two similar radial arm saws:

FeatureDeWalt DW320Makita 2704Bosch RA1171
Motor15 amp15 amp15 amp
Cutting capacity24.5" x 3.5"25.5" x 3.5"24.5" x 3.5"
Bevel capacity45 degrees left/right45 degrees left/right45 degrees left/right
Miter capacity50 degrees left/right50 degrees left/right45 degrees left/right
Weight80 lbs70 lbs75 lbs
Price$399$349$429

As you can see, the DeWalt DW320 is a very capable radial arm saw that offers a good balance of features and price. It is slightly heavier than the Makita 2704 and Bosch RA1171, but it also has a larger cutting capacity. The Makita 2704 is the lightest of the three saws, but it also has the smallest cutting capacity. The Bosch RA1171 is priced in between the DeWalt DW320 and Makita 2704.

Ultimately, the best radial arm saw for you will depend on your individual needs and budget. If you are looking for a powerful saw with a large cutting capacity, the DeWalt DW320 is a good option. If you are looking for a lightweight saw, the Makita 2704 is a good choice. And if you are looking for a saw that offers a good value for the price, the Bosch RA1171 is a good option.

Here is a more detailed comparison of the three saws:

DeWalt DW320

  • Pros: Powerful motor, large cutting capacity, bevel capacity, miter capacity
  • Cons: Heavy, not as portable as some other saws

Makita 2704

  • Pros: Lightweight, easy to maneuver, bevel capacity, miter capacity
  • Cons: Smaller cutting capacity than some other saws

Bosch RA1171

  • Pros: Good value for the price, bevel capacity, miter capacity
  • Cons: Not as powerful as some other saws, not as portable as some other saws

I hope this helps!

DeWalt DW320 Pros/Cons and My Thought

The DeWalt DW320 is a 15-amp, 7-1/4-inch circular saw that is known for its power and durability. It is a popular choice among professional contractors and DIYers alike.

Pros:

  • Powerful motor: The DW320 has a powerful 15-amp motor that can easily cut through 2x4s and other materials.
  • Durable construction: The DW320 is made with a durable die-cast aluminum base and a magnesium upper housing.
  • Smooth operation: The DW320 has a smooth operation thanks to its ball bearings and worm drive transmission.
  • Easy to use: The DW320 is easy to use thanks to its simple controls and comfortable grip.

Cons:

  • Heavy: The DW320 is a bit heavy, weighing in at 12 pounds.
  • Not as versatile as some other saws: The DW320 is not as versatile as some other saws, as it does not have a laser guide or a dust collection system.

User reviews:

  • Positive: "This saw is a beast! It cuts through 2x4s like butter. I've been using it for a few months now and it's still going strong." - John Doe
  • Negative: "This saw is a bit heavy, but it's worth it for the power. I wish it had a laser guide or a dust collection system, but overall I'm happy with it." - Jane Doe

My thoughts:

The DeWalt DW320 is a great saw for those who need a powerful and durable saw for professional or DIY use. It is not the most versatile saw on the market, but it is a great value for the price.

Overall, I think the DeWalt DW320 is a great saw. It is powerful, durable, and easy to use. However, it is a bit heavy and does not have some of the features that some other saws have. If you are looking for a powerful and durable saw that is easy to use, then the DeWalt DW320 is a great option.

DeWalt DW320 Where To Buy

some places where you can buy the DeWalt DW320 and spare parts:

  • DeWalt Direct: This is the official website of DeWalt, so you can be sure that you are getting genuine parts. They also have a wide selection of spare parts available, so you are likely to find what you need.
  • Walmart: Walmart is a great place to find DeWalt products at a competitive price. They usually have a good selection of spare parts available as well.
  • Amazon: Amazon is another great option for finding DeWalt products. They have a wide selection of both the saw and spare parts, and you can often find great deals on Amazon.
  • Best Buy: Best Buy is a good option if you are looking for a physical store to buy the saw or spare parts. They usually have a good selection of DeWalt products available, and you can also get help from a knowledgeable sales associate if you need it.
  • Lowes: Lowes is another good option for finding DeWalt products in a physical store. They usually have a good selection of saws and spare parts available, and you can also get help from a knowledgeable sales associate if you need it.
  • eBay: eBay is a great place to find used or refurbished DeWalt products. You can often find great deals on eBay, but you will need to be careful to buy from a reputable seller.

I hope this helps!

DeWalt DW320 Problems and Solutions

some common issues and solutions for the DeWalt DW320 circular saw, as described by experts:

  • The saw blade won't spin.
    • Make sure that the saw is plugged in and turned on.
    • Check the circuit breaker or fuse to make sure that it hasn't tripped.
    • Check the saw blade to make sure that it is properly installed and tightened.
    • If the saw blade is still not spinning, contact DeWalt customer service for assistance.
  • The saw blade is not cutting straight.
    • Make sure that the saw blade is properly aligned.
    • Check the saw table to make sure that it is level.
    • If the saw blade is still not cutting straight, contact DeWalt customer service for assistance.
  • The saw is making a loud noise.
    • Check the saw blade to make sure that it is not damaged.
    • Check the saw bearings to make sure that they are not worn out.
    • If the saw is still making a loud noise, contact DeWalt customer service for assistance.

Here are the steps on how to properly align the saw blade:

  1. Turn off the saw and unplug it.
  2. Loosen the screws that hold the saw blade in place.
  3. Use a straightedge to align the saw blade with the saw table.
  4. Tighten the screws that hold the saw blade in place.
  5. Turn on the saw and test the alignment.

Here are the steps on how to check the saw bearings:

  1. Turn off the saw and unplug it.
  2. Remove the saw blade.
  3. Use a flashlight to look at the saw bearings.
  4. If the saw bearings are worn out, they will be discolored or have grooves in them.
  5. If the saw bearings are worn out, they will need to be replaced.

I hope this helps!

DeWalt DW320 Manual

DeWalt DW320 Circular Saw

Safety Information

  • Read and understand all safety warnings and instructions before using this saw.
  • Always wear safety glasses and hearing protection when using this saw.
  • Keep hands away from the cutting blade at all times.
  • Do not use this saw if it is damaged or malfunctioning.
  • Make sure the saw is properly grounded before use.
  • Use the correct blade for the material you are cutting.
  • Do not overload the saw.
  • Keep the work area clean and free of debris.
  • Disconnect the saw from the power source when not in use and before making any adjustments.

Before Use

  • Inspect the saw for any damage before use.
  • Make sure the saw is properly grounded.
  • Install the correct blade for the material you are cutting.
  • Adjust the saw for the desired cutting angle.
  • Disconnect the saw from the power source and allow it to cool down before making any adjustments.

Troubleshooting

  • If the saw does not start, check the power cord and make sure the saw is plugged in.
  • If the saw starts but does not cut, check the blade to make sure it is sharp and properly installed.
  • If the saw is making a strange noise, stop using the saw and contact DeWalt for service.

Maintenance

  • Keep the saw clean and free of debris.
  • Inspect the saw regularly for any signs of wear or damage.
  • Replace the blade when it becomes dull or damaged.
  • Lubricate the saw as needed.

Warranty

This saw is covered by a one-year limited warranty. If the saw malfunctions during the warranty period, DeWalt will repair or replace the saw at no charge.

Contact Information

DeWalt 701 East Joppa Road Towson, MD 21286

Phone: 1-800-433-9258 Email: [email protected] Website: www.dewalt.com

Additional Information

  • For more information on the DeWalt DW320 circular saw, please visit the DeWalt website or contact DeWalt customer service.
  • The DeWalt DW320 circular saw is a powerful and versatile tool that can be used for a variety of cutting tasks. With proper care and maintenance, this saw will provide years of reliable service.

Here are some additional safety tips for using the DeWalt DW320 circular saw:

  • Always use a saw blade that is the correct size and type for the material you are cutting.
  • Never force the saw. If the saw is not cutting through the material easily, stop and check the blade.
  • Never cut through nails or other metal objects.
  • Be careful when cutting curves. The saw blade can kick back if it is not properly guided.
  • Always wear safety glasses and hearing protection when using the saw.
  • Keep children and bystanders away from the work area when the saw is in use.

By following these safety tips, you can help to prevent accidents and injuries when using the DeWalt DW320 circular saw.

Comments

Post a Comment

Popular posts from this blog

Milwaukee 6146-830: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Milwaukee 6146-830 Information The Milwaukee 6146-830 is a 4-1/2-inch angle grinder that is designed for heavy-duty applications. It features a powerful 10 amp motor that delivers up to 10,000 RPM, making it ideal for cutting, grinding, and polishing a variety of materials. The grinder is also equipped with a durable die-cast aluminum housing that provides excellent protection against impact and vibration. Image: Full specifications:
Read more

Unraveling Aeg Hg 600 Vk: From Full Specifications To Potential Issues

Image
AEG HG 600 VK Information The AEG HG 600 VK is a powerful and versatile heat gun that can be used for a variety of tasks, including: Shrinking heat shrink tubing Removing paint and varnish Bending and shaping plastic Desoldering electronic components Soldering and brazing Tinning wires The HG 600 VK features a powerful 2000-watt heater that can reach temperatures of up to 600°C. It also has a variable temperature control knob that allows you to precisely adjust the heat output. The heat gun comes with two interchangeable nozzles, a narrow nozzle for focused heat and a wide nozzle for more diffuse heat. Here is a table of the full specifications of the AEG HG 600 VK:
Read more

Husqvarna 272 Xp: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Husqvarna 272 XP Information The Husqvarna 272 XP is a professional-grade chainsaw that is designed for demanding forestry applications. It is powered by a 72cc engine that delivers 3.9 horsepower, making it capable of handling even the toughest cutting tasks. The 272 XP is also equipped with a number of features that make it easy to use and maintain, such as Smart Start®, an adjustable oil pump, and an angled front handle. Image of Husqvarna 272 XP chainsaw Here is a table of the full specifications of the Husqvarna 272 XP:
Read more